SilveRboard R10 High Density 35 PSI Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft SB35S200424KIT

SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456

$92.95
Skip to product information
SilveRboard R10 High Density 35 PSI Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft SB35S200424KIT
  • SilveRboard R10 High Density 35 PSI Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft SB35S200424KIT
  • SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456
  • SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456
  • SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456
  • SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456
  • SilveRboard R10 High Density 35 PSI Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft SB35S200424KIT
  • SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456
  • SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456
  • SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456
  • SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456
SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456

SilveRboard R10 High Density Under Slab Insulation Kit 2 in. x 2 ft. x 4 ft N456

$92.95

SilveRboard R- 10, 2-in x 4-ft x 20-ft Faced Polystyrene Board Insulation

  • “Designed to be installed below-grade and under high- load concrete slab applications
  • as continuous insulation
  • a vapor barrier and reduce thermal bridging – ideal for under commercial slabs
  • driveways
  • sidewalks and foundation walls”
  • “Creates a thermal envelope for maximum heat/cooling efficiency
  • the non-perforated film functions as a vapor barrier when joints are taped with an approved vapor barrier tape.”

SilveRboard HD ( high density )- (10 sheets, 2 ft. x 4 ft. x 2 in. – R10) 80 sq. ft. under slab insulation is a high performance, high compression strength (35 psi) flat-sheet insulation material made from expanded polystyrene (EPS) which is bonded to a reflective film laminated on both sides. This highly effective combination of materials offers a high R-value per inch exceptional board toughness and load capacity compared to traditional flat-sheet rigid foam insulation, as well as provides a built-in moisture and air barrier. This non perforated SilveRboard rigid foam insulation (EPS) offers builders a higher performance product which increases job-site efficiency and reduces labor costs. No off-gassing and does not contain fluorocarbons, exceptional long-term thermal resistance (LTTR), and increased thermal resistance in lower temperatures.

You may also like