Trailer Floor Coating - Black, 1 Quart P16311

Ready to Use. No mixing, shaking or diluting. Easy roll on application. Water resistant. Non-slip, textured finish. Available in black (satin finish) and grey. Coating must be applied and cured in temperatures of 60 degrees or higher. Please note, using less than the required 2 coats will jeopardize the integrity of the coating. Non-flammable, Self-Extinguishing. Excellent adhesion on wood, painted surfaces, clean bare metals, concrete and more. Pro-tip! No need to rinse and clean your roller cover if you are planning to apply the second coat within a couple of days or even weeks. Simply wrap your wet cover in cellophane, wax or parchment paper. For longer storage periods, place the cover in a zip tie plastic bag and push out most of the air before closing. Keep the cover in a dry and cool place and you will be able to reuse it without cleaning. Anti-Slip; Gritty; Non-Skid; No-Slip; Textured Surface TK64 Trailer Floor Coating is a water-based, plastic coating formulated to withstand abrasion in automotive, industrial and agricultural environments. It offers a textured slip-resistant finish in either black (satin finish) or grey. Apply with included 3/8″ foam roller. 2 coats minimum required. Excellent adhesion on metals, wood, concrete, and painted surfaces. Use only outdoors or in a well-ventilated area. TK64 should not be exposed to temperatures below 60°F during the application and the curing process. Use proper protective eyewear and clothing. DO NOT FREEZE and DO NOT STORE IN DIRECT SUN. 1-year shelf life. Excellent adhesion on plywood, treated plywood, oriented strand board (OSB) and bare wood. Ideal for 4×4 tubs, roll bars, bumpers, underbodies, wheel wells, rocker panels, trailer floors and DIY pick-up beds. New trailer floors will only require a light sweeping out before application. Used trailer floors require a more thorough cleaning with special attention to oil spots and gasoline spills. For used trailer floors, remove/replace rotted wood and splinters, fill in major cracks/holes with paintable wood putty. Clean floor with waterborne degreaser (i.e. citrus degreaser). Rinse thoroughly with hose/pressure washer and allow for the floor to completely dry. Repeated cleaning of oily spots might be necessary to ensure proper adhesion. A fan will increase air flow and reduce drying time.